COMPATIBLE STANDING SEAM PROFILES

FusionSolar is available with the Custom-Bilt Metals’ standing seam roof profiles shown below.

CB-2000

TITAN® CB-2000 MECHANICAL SEAM WITH FUSIONSOLAR

  •  
  • - Seam Height: 2”
  • - Standard Panel Widths: 18”
  • - Minimum Slope: 1/2:12
  • - Approvals: Please ask a CBM Representative

Common applications:

  •  
  • - Residential
  • - Commercial
  • - Public Works

This panel is recommended for roof slopes as low as 1/2”:12 roof pitch.

  • - Panels without FusionSolar can be roll-formed on the jobsite to eliminate waste.
       However, FusionSolar laminate is factory-installed. Those panels must be
       ordered and shipped separately.
  • - Concealed fastener system
  •  

CB-150

TITAN® CB-150 MECHANICAL SEAM WITH FUSIONSOLAR

  •  
  • - Seam Height: 1.5”
  • - Standard Panel Widths: 16”
  • - Minimum Slope: 1:12
  • - Approvals: Please ask a CBM Representative

Common applications:

  •  
  • - Over solid decks or spaced purlins
  • - Residential
  • - Commercial
  • - Public Works

This panel is recommended for roof slopes as low as 1:12 roof pitch. Features:

  • - Panels without FusionSolar can be roll-formed on the jobsite to eliminate waste.
      However, FusionSolar laminate is factory-installed. Those panels must be
      ordered and shipped separately.
  • - Concealed fastener system
  •  

SL-1750

TITAN® SL-1750 SNAP LOCK WITH FUSIONSOLAR

  •  
  • - Seam Height: 1.75”
  • - Standard Panel Widths: 18”
  • - Minimum Slope: 3:12
  • - Approvals: Please ask a CBM Representative

Common applications:

  •  
  • - Residential
  • - Commercial
  • - Public Works

This panel is recommended for roof slopes greater than 3:12 roof pitch. Features:

  • - Panels without FusionSolar can be roll-formed on the jobsite to eliminate waste.
       However, FusionSolar laminate is factory-installed. Those panels must be
      ordered and shipped separately.
  • - Commercial
  • - Concealed fastener system
  •